Printing and embroidering T-shirts
is back in fashion. It gives the garments an individual touch. Regardless of
whether you want to have a company logo embroidered on business shirts, or have
the club clothing printed or embroidered with the club logo, a large selection
of finishing techniques is available to you. If you have your t-shirt printed
yourself, you have a wonderful and creative gift for friends and family, for
example. As a rule, you can buy the textiles already printed or embroidered
from the manufacturer. However, it is nicer if you design the T-shirt yourself
according to your ideas. The printed or embroidered textiles can be produced
inexpensively in small runs from 20 pieces.
Flock printing and transfer foil printing
There are a few details to
consider when choosing the right printing technique. For example, you can not
only have Custom
T-shirts label printing Dubai with a transfer film. Because if a large
area is provided with a textile print, it must be noted that the textile is no
longer too flexible at this point. There may be unsightly cracks in the
transfer film, which cannot be repaired even if you iron it on again. In this
case, flock printing is recommended. Because with this process, the print
remains elastic.
Flock printing is a high quality
textile printing variant. A special film with a velvety and soft surface is
used in a flocking process. The flocking itself is made on the basis of viscose
fibers so that the material looks like new even after being washed several
times.
A large selection of colors is
available for the design of the print. The colors themselves are plotted
individually and thus also allow color gradients. The flocking process is
characterized by high washing resistance and light fastness. If properly cared
for, the clothing retains its good quality longer than is the case with
conventional transfer printing.
Information on the care of embroidered and printed textiles
Flocked textiles can be washed at
up to 60 ° C. We recommend using a mild detergent that is gentle on the colors.
The flocked surfaces swell with water and any signs of wear and pressure marks
disappear. The constant rotation of the washing machine drum, however, puts a
relatively high load on the textiles. For this reason, you should wash all
flocked textiles inside out. This prevents direct abrasion during the wash
cycle. In order to preserve the quality of the flocked surface longer, you
should use a mild detergent at the end of the wash cycle. Bleach must not be
used in flock printing. After washing, the garment can be ironed inside out.
All printed textiles may only be dried in cold air in the tumble dryer.
The most durable variant of
textile finishing is embroidery service in Dubai. The
maintenance of embroidery is a little different from flock or transfer
printing. These are basically characterized by the highest level of wash and
light resistance, as well as durability. Because the embroidery thread allows
all the stretching of the fabric and in terms of the color fastness of the
yarns, the embroidery process is the highest quality and most versatile method
of textile finishing.
Embroidered textiles should
generally be washed up to 40 °C. It is essential to avoid using bleach and
tumble drying. The embroidery must not come into contact with an iron.
Therefore, please iron the textile on the back.
No comments:
Post a Comment